|
|
|
|
Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.
Output:
Separated luminance and chrominance signals via a 4-pin mini-DIN connector
(S-Video).
Left and right audio available via phono connectors.
Auto-detection:
Computer analysis of input signal to determine if the RGB input is
formatted for PAL or NTSC.
Chrominance subcarrier automatically adjusted to suit - 4.43MHz for
PAL and 3.58MHz for NTSC.
PAL and NTSC phase information adjusted to suit video standard.
(This does not converter PAL to NTSC or vice versa, please see GTH
Electronics for such a unit.)
Power:
Standard fused UK mains plug, 230V and 50Hz ac. Power consumption
less than 5W.
LED power indicator.
Dimensions:
120x85x35mm.
Input:
RGB input from domestic video equipment, 1V pk-pk.
SCART input connector.
Output:
RGB with separated horizontal and vertical synchronisation information
at TTL levels (0V to +5V) via a
15-pin density and a half D-Type VGA connector.
Left and right audio available via phono connectors.
Copy Protection Compatibility:
Computer control to enhance compatibility with copy protected sources
while still maintaning accuracy of unit.
Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac.
Power consumption 1W. LED power
indicator.
Dimensions:
150x85x48mm.
Input:
RGB / S-Video / Composite input from domestic video equipment, 1V pk-pk.
SCART input connector.
75 ohm terminations.
Output:
Two separated outputs via SCART connectors.
All video signals are buffered for 75 ohm reverse terminated cables.
Audio and wide-screen information passed through.
Power:
Standard fused (3A) UK mains plug, 230V and 50/60Hz ac.
Power consumption 1W.
LED power indicator.
Dimensions:
150x80x55mm.
Pat. Pending. Contact:
 |
  |